Wednesday, November 18, 2026

Crosman MK2 Moderator Adapter Part 1

Realized the other evening that I rarely never do basement shooting anymore with CO2 airguns that don't have moderators.  And that realization kinda sucked.  I've got some cool vintage airguns that deserve some trigger time. 

A quick inventory of the various pieces and parts on hand (and a revisit of a past Crosman MK1/MK2 project ) came up with a straightforward way to make and attach a moderator to a vintage Crosman MK2.  

The old Crosman MK1 and MK2 use a tensioned barrel arrangement:  The barrel is held at the breech end via a 3/8-24 threaded nut, the barrel extends through the hollow shroud and another 3/8-24 nut holds the shroud in place at the muzzle.  

I could just make a new barrel nut with a 1/2"-20 thread for a moderator, but I'm not particularly enamored with the tapered shroud the Crosman MK1 sported.  I know it's a close copy to the Ruger MK2 it's copied from--I just prefer the later bull barrel design.

Refer to those Crosman MK1/MK2 posts linked to above if you need a more in-depth look at how the gun is assmbled. 



OK, since I still have some 7/8" (0.875") OD DOM steel tubing on the shelf...








































Stepped the breech end of the tube to fit into the grip frame.



























Then added a short taper.  This was needed to get some additional clearance in this particular Crosman MK2 grip frame.






























And just like that.  I'm test fitting!  Almost done?  Nope.































Marked with a pencil.  

































And then I got fancy and cut a counterbore at the muzzle end of the shroud for the barrel nut.




































Decided a tapered mating surface between barrel nut and shroud might give better barrel centering and repeatability.   I also had this 90 degree countersink in exactly the right diameter...







 





























Now for the barrel nut:




























Stepped a piece of 12L14.     



























This angle gage let me easily set the cutter angle to match the 90 degree countersink used above.




























Through drilled for .22 pellet clearance.





























Then drilled and threaded the end 3/8-24 to screw to the barrel.













































Another test fit. 


























This is a plastic monocore baffle from Crosman.  It's an off-the-shelf part that Crosman used on their Benjamin Trail NP2 gas piston rifle.






































Flipped the adapter, and with some tail stock support, turned the end down to 1/2" in diameter.
































And threaded it 1/2-20 to fit the Crosman baffle.































Relieved the end of the thread for clearance.






























Reduced the diameter at the end to just fit through the first centering spacer.



































Test fit.


























Some carbon fiber tubing was cut to length.
























I'll get part 2 up in another day or so. 

Thanks for reading.    








1 comment:

Paul said...

Sweet! Somehow I'd never seen a Mk1 or Mk2 Crosman. A friend down in Alabama has a Ruger Mk1 or Mk2 with a an integral moderator, looks like a simple bull barrel pistol but quiet as can be. This build looks like it's going the same direction. Looking forward to future installments.