Saturday, February 19, 2011

A.B.T. Shooting Gallery Rifle Disassembly, Part 2

On I go.

02161126

The action came out of the housing.

02161127

The forestock seems to have been “repaired” at some point.

02161128

The flap of rubber/polyester/? came loose allowing the bushing to stay in place. This will need a repair.

02161129

That bushing. Notice the red line? I think that’s RTV gasket seal, possibly, which is why the screw wouldn’t come out easily.

02161130

Bushing and the two screws.

02161131

The trigger guard is riveted to the housing.

02161132

The rivet heads.

02161133

The barrel shroud. I unscrewed the magazine end plug.

02161134

That’s a long guide and spring.

02161135

The spring end.

02161136

The screw is soldered to the rod.

02161137

The breech.

02161138

These two screws presumably retain a bushing that aligns the barrel. I removed them but the bushing wouldn’t budge so I put them back in.

02161139

Back to the action.

02161140

When the trigger is pulled it does several things, including moving the feed shuttle up and down.

02161141

The block that holds the barrel to the action.

02161142

four screws plus on that retains that weird tab.

02161143

What is that tab for? Note the screw heads have already seen “service”.

02161144

Removed.

02161145

Four screws…

02161146

All the same.

02161147

Block lifts off of the action.

02161148

It’s aligned by two dowel pins.

More to come…

5 comments:

Entomophile said...

Just a thought but is that wierd tab used to set the height of the action in the stock?

The Lion Tamer said...

Can you repair a webley hurricane? I know what parts it needs but don't have the knowledge!

The Lion Tamer said...

I realise this is on a tangent, but would you know of anyone who can repair my webley hurricane? I know what bits it needs but I don't have the knowledge'
Tony

Felice Luftschein said...

Tony,
Best place to ask it the yellow airgun forum, there are a bunch of guys who do repairs:
http://www.network54.com/Forum/79537/

It's fairly easy to fix yourself if you can source the replacement parts.

Felice Luftschein said...

If you're in the UK(?) then ask on the Uk forum:
http://www.airgunbbs.com/index.php