Sunday, October 20, 2013

Diana Model 16 Disassembly, Part 2


Just a bit more

10201330
The spring guide slides out.

10201331
The spring guide.

10201332
Two pieces joined together. The use of sheet metal in this design is interesting.

10201333
The spring is a bit wiggly…also there is little if any lubrication evident.

10201334
The cocking arm is captured by its little ears.

1020133510201336
The cocking arm slides out the back end of the receiver tube.

10201337
The barrel detent. Staked in place.

10201338
The piston, also made entirely of sheet metal, welds and rivets.

10201339
The sear is an insert.

10201340
Oh, there’s some lube, reduced to putty by age.

10201341
The leather piston seal is riveted in place. That is inconvenient. I hope I can massage it into shape in place.

10201342
The other end of the rivet.

10201343
It doesn’t look as bad now, although that leather is really pliable.

10201344
I pried the breech washer out.

10201345
Ii was backed by a cardboard domed shim.

10201346
Interesting. The seal should be fine for reuse.

10201347
The breech end. The barrel is brass (or a yellow alloy of some sort). The entire barrel assembly is best left as-is I think.

10201348
That’s all the parts. Now to clean, steel wool the rust, lube and reassemble. Not happy about the spring but I don’t have a spare that size. May hit the hardware store and see what they have.

7 comments:

James said...

Just found your blog. Can't believe how many photos you have! Great resource for airgunners alike. Adding you to my Feedly and will be back. Cheers!

Unknown said...

tencyThanks for the blog on the Diana 16, i did one a while back on my Angry angry gun company blog but lost all my pictures for it. So it's good to see your indepth artical which puts mine to shame, if you don't mind i would like to put a link to your Diana project as i goes into a lot more detail. It's good to see you have found time to do some entries, keep up the good work.

TTFN

Best wishes, Wing Commander Sir Nigel Tetlington-Smythe.

Nick Carter said...
This comment has been removed by the author.
Nick Carter said...

Please do link, this is a resource for the community and it helps people find us. I'm glad I found the time and a different airgun to work on.

Unknown said...

I've just replaced the spring in my father-in-law's Diana 16 he had it in the 50s when he was 10. I think the seals are now the issue as it won't fire pellets on the first go, they get part way along the barrel and stop. Using your pictures I'll look at resurrecting them. Hopefully I can get it running again.

Unknown said...

Does anyone know where I can get a breech seal and leather breech seal for a Diana mod 16.
I can find anyone.

Felice Luftschein said...

It's leather, just make one.
Nick