A while back a request was made to take apart my Manu-Arm air pistol. Finally got to it.
The box.
Pistol and drawing.
Drawing.
Instructions.
.
It’s not a bad looking pistol, for all the potmetal and plastic.
One screw through the grip.
And two screws on either side into the action.
The housing comes apart typically.
Notice the trigger adjustment screw.
There’s a dowel pin loosely in that grip hole to align the grips.
The action removed.
A view of the action…
And another of the trigger…
Break the barrel to relieve tension.
Remove the pivot screw. Notice the steel washers on the pivot bearing.
I punched out the cocking linkage pin. I was very cautious when knocking out pins as most of the parts are potmetal and could break.
Barrel removed. More to come…
8 comments:
Hello,
I have this same pistol and the sight broke.
It would be part 40 in the exploded view (the actual sight that attaches to the sight screw). It is broken in half.
Any idea where I could order it from? I tried to contact manu arms but they are no longer in business.
Thank you
Either try and find a parts gun on Gunbroker, etc. or adapt a sigt from another gun. It wouldn't be that hard to make one if you have a drill press and some files.
Any email address where I could contact you?
Thank you
Does anyone repair them? I have a brand new Manu white in hard case inheritance that will not shoot, can pull barrel but won't activate something wrong with air pressure chamber? Thank you
Looking for part 2,3 and 40. Who can help me?
For anyone trying to replace the seal in the air chamber I used part # DCK-PS25 Adapter kit from vortekproducts.com and so far so good
I have a .22 version of this gun. Hardly used and in 1st class condition with all parts intact. I've had to fully stripped the gun to try and find an internal problem. Discovered the piston body has snapped into 2 pieces. ( part No 30 in the above drawing) Anyone have a spare/new piston body for sale or maybe a breaker gun. Thanks.
How do I fix if the pistol is not firing when loaded? It makes a noise but the chamber pin is not firing the pellet
Post a Comment