Sunday, March 25, 2012

Crosman Trapmaster 1100 Disassembly, Part 1

I worked out a trade with a friend for a Crosman Trapmaster 1100. I’ve always wanted one because it’s a shotgun and shotguns are fun. I also got the trap and clays, which I’ll show when (if) I get this thing resealed. In any case the shotgun needed disassembly, seals and cleaning.
03221201
The Trapmaster. Even the name is cool.
03221202
The nameplate.
03221203
Other side.
03221204
Bottom.
03221205
Gas cap.
03221206
It’s a toggle piercing cap. Bottom CO2 cartridge is pierced when you screw it down, top is pierced when you toggle the lever.
03221207
Two old cartridges.
03221208
The butt plate was nasty and the screws are rusty.
03221209
#3 Phillips bit.
03221210
Screws very rusty and one was loose in the hole.
03221211
I’ll have to plug the screw holes and redrill. The big hole is to access the stock bolt.
03221212
Butt stock removed.
03221213
Loosening the front bearing clamp.
03221214
The setscrews bear on the bearing ( that the barrel slides in).
03221215
Two setscrews and the clamping screw.
03221216
Plastic bushing is the bearing.
Much more to come…

2 comments:

  1. i want to buy it ill give you $150

    ReplyDelete
  2. Thank you for showing how the co2s work I have not been able to find that information anywhere you are awesome thank you, 😁😁😁

    ReplyDelete