Saturday, July 2, 2011

IZh-60 Rifle Disassembly and Comparison to IZh-61, Part 3

06301113



I removed the screw that holds the bolt stop in the breech but it wouldn’t come out.



06301114



So I repeatedly flicked the bolt under its spring’s power and it came out.



06301115



Removed.



06301116



The bolt seems to hang up on the rather sharp transition between the main diameter and the probe, so that will need to be addressed.



06301117



Removed one pin…



06301118



Trigger and transfer bar (?) units.



06301119



Sear.



06301120



Another view.



06301121



I removed the stop screw.



06301122



Tiny screw.



06301123



And rotated and pulled off the cutoff for the cocking lever.



06301124



It’s a neat part.



06301125



It was spring loaded.



06301126



I was going to remove the front catch pin for the cocking lever as it also holds the front breech cap in place but…



06301127



Looks to have been peened in at the factory, so best to just leave it be.



06301128



And last, the spring, compared with one from an IZh-61. The broken spring had 3 or so less coils and was .118 vs .100 diameter wire and was smaller in both inside and outside diameter. I think it may have been an attempt to get more power by a previous owner as I would assume it would have the same spring as the IZh-61. But who knows.
Now to clean, lube, repair and replace items and get it up and running. Then figure out what sort of sights to put on it.

4 comments:

  1. You mistook the sear for the transfer bar. The lever you labeled as sear sits between trigger and sear. It is quite confusing, as the system works on two planes - sear and trigger sit left&right on the same steel bolt. Have a look at this diagram to understand:
    http://www.muzzle.de/N3/Druckluft/Baikal_IZH_61/muzzle_baikal_izh61_manual04.JPG

    ReplyDelete
  2. any tips on the front sight? have you found any way to put a globe in there?

    ReplyDelete
  3. Haven't figured out what I'm going to do yet - right now it has a red dot sight mounted on it.

    ReplyDelete