Baikal IJ-22 Air Rifle Disassembly, Part 2

On I go…

The action in the spring compressor.


Punching out the rear pin.


The trigger block rotates to clear the detent.


Removed.


Think the spring is just a little canted?


The cast piston.


Cocking lug and sear.


Leather seal.


Barrel latch.


I love seeing a lockscrew on the pivot screw.


The latch.


Spring loaded!


Latch parts.


You can see the top of the trigger through a hole in the block.


Trigger unit.


One spring not to lose.


Trigger spring.


One pin pushed out. The pins are tight but not too tight. Light raps of a 4 oz. ball peen hammer did the trick.


Parts.


Trigger pivot pin.


Careful not to lose that spring!


A simple trigger, but robust! There was no lubrication anywhere.

More to come…