I picked this Benjamin 3030 CO2 BB “rifle” (since it isn’t rifled) up on Gunbroker. I was always intrigued by the design and the advertised ability to “drive steel bb's clear through both sides of a 5 gal. steel pail at close range”. Why I’d want to do that isn’t the issue.
The rifle, rusty and dirty.
The wood looks like it could use a refinish.
The metal is pitted so I’m not sure what I’ll do. Probably paint it.
It cocks similarly to the Crosman 700/707 which it seems to share a similar mechanism with.
That’s the end of the 8 gram CO2 bulb sitting inside the cap.
Remove the stock screw.
Simple trigger.
An old rusty CO2 cartridge.
The cartridge seals here below the neck.
All that debris makes for a gritty trigger.
Two pins retain the trigger and spring.
Rear sight.
Removed.
More to come...
Have you done anything more to the 30/30? just picked one up and anxious to see how it shoots. Is this a 22 or a 177? did they come in both? Did you lengthen the cartridge magazine or get 8 gram cartridges. albert yoepatties@yahoo.com
ReplyDeleteI got it working, but lost interest in getting it to be less of a gas hog. (there are a bunch of posts showing reassembly, BTW). Mostly I ran out of 8gr. carts and I've been too cheap to buy more.
ReplyDeletewell I got my carts, and it dumps the whole cartridge
ReplyDeletein 1 shot..
If you would like to sell the 3030 I would be interested...njmark53@yahoo.com...have a parts gun i wore out as a kid...bty just before the rifle wore out it would only shoot full auto...bb feed tube completely wore away...
ReplyDelete