I finally got around to disassembling and lubing the Hy-Score Air Rifle I traded for a while back.
One screw is removed from the front of the stock.
And the rear trigger guard screw is removed.
This is where identification of the air rifle gets a bit murky. Printed in yellow ink is "Model 8?1" Not sure if it's a three or a five or what.
The Blue Book of Airguns lists the following Hy-Score model numbers for Hammerli made rifles:
Hy-Score 821, 833SM, 894 - sidelever rifle made by Hammerli of Germany
Hy-Score 833 - Hammerli Model 10 (Puma Model 497)
Hy-Score 894 or 894 Sport - Hammerli Model 4 (Puma Model 490)
However in looking at the section on Hammerli rifles none are listed in .22 caliber.
Since the rifle does not have anti-beartrap provision (but more on that later), it is likely to be a 490 series of Puma, rather than a 400.
Likewise Walter's "The Airgun Book" does not list a Hammerli in .22
It lists the Hy-Score 821 as being equivalent to a Hammerli Model 2 (Puma 495)
But that middle digit doesn't look like a "2" to me. I'm just going to live with the mystery.
Another mystery, the trigger unit looks either like a home made replacement housing (a well made replacement) or a prototype.
The dowel pin holding the trigger spring was drilled a little off, but it doesn't seem to matter.
I have no idea what any of the adjusting screws do.
A couple more views.
Not a bodged together housing by any means.
I think the pin started to push out because it wasn't secured in the other side. I fixed that.
Moving on...The pin for the cocking lever was pressed out.
And the cocking lever disengaged from the piston and housing.
I mounted the remainder in the spring compressor.
And punched out the end cap retaining pin.
This is how much preload the spring has.
See what I said about the anti beartrap? Those notches are presuambly for the anti beartrap mechanism, but there was nothing to bear against them.
On to part 2
Hi I enjoy your posts immensely. I think the Hammerli is a 420. a friend of mine had one 30 years I thought it was Swiss imported into the UK. The cocking lever strut is prone to breaking, power might be improved by fitting a shorter spring. Regards Shaun Dipple
ReplyDeleteThe trigger housing is correct. I have this model with cheek rest. It is model 821, also in yellow stamp. See Popular mechanics.https://books.google.com/books?id=NAEAAAAAMBAJ&pg=PA80&lpg=PA80&dq=hy+score+821&source=bl&ots=vA6T1CLfEz&sig=kcu5CEs9PKB7CB_nQC4kxmoW_QU&hl=en&sa=X&ved=2ahUKEwjf94zjzZPbAhUH5oMKHWn3AZ8Q6AEwCnoECAYQAQ#v=onepage&q=hy%20score%20821&f=false
ReplyDeleteI am Gaurav Kambli
ReplyDeleteFrom India
I have this Hammerli side lever ai rifle
I want the trigger mechanism of this gun Please contact me