Another Airgun Blog
A blog about tinkering with airguns
Tuesday, February 10, 2009
Resealing the Smith and Wesson Model 79G, Addendum
›
I noticed that some gas was coming out of the breech when firing, bypassing the bolt. Then I remembered that I had not changed the bolt o-ri...
3 comments:
Sunday, February 8, 2009
Resealing the Smith and Wesson Model 79G, Part 2
›
And on I go. The small o-ring for the piercing assembly was replaced with a Viton o-ring. As was the large one. I didn't get an exact si...
5 comments:
Saturday, February 7, 2009
Resealing the Smith and Wesson Model 79G, Part 1
›
Now to fabricate the valve stem seal. When I did the Crosman 167 I tried to punch the seal from sheet but didn't have good results. This...
3 comments:
Friday, February 6, 2009
Smith and Wesson Model 79G Disassembly, Part 3
›
Almost done... The piercing assembly. Align the holes on the outer sleeve and punch out the roll pin. All apart. Small slotted nut on the in...
11 comments:
Thursday, February 5, 2009
Smith and Wesson Model 79G Disassembly, Part 2
›
Onwards... The valve assembly. The transfer port bushing/gizmo is supposed to be (or was) staked in place but came loose earlier. Remove the...
‹
›
Home
View web version
